E7W01A Specification
MSA 1040 Specification |
|
|
Capacity Single Enclosure and Maximum Additional Drive Enclosures |
LFF: 120 TB (single LFF array-head -using 12 x 10TB LFF SAS MDL drives) 480 TB (by adding 3 LFF Disk Enclosures behind LFF Array & using 10 TB LFF SAS MDL drives) SFF: 43.2 TB (single SFF array-head – using 24 x 1.8TB SFF SAS drives) 178.2 TB (by adding 3 SFF Disk Enclosures behind SFF Array & using 1.8TB SFF SAS drives) NOTE: 1) maximum available storage capacity depends on the RAID level being implemented |
|
Pool Capacity |
GL200: 169 TB (154 TiB) GL210: 219 TB (200 TiB) GL220: 329 TB (300 TiB) GL220 with Large Pool Support: 562 TB (512 TiB) NOTE: 1) The above pool capacities by firmware release apply to virtual storage only 2) The above capacities are usable capacity/pool. Each MSA system can support two pools. Therefore each MSA storage system can have double the usable capacity listed above |
|
Cache |
6 GB per controller NOTE: 6GB cache includes Data (Read/Write) cache = 4GB and Metadata and System OS cache = 2GB |
|
Total LUNs (LUN size are dependent of the storage architecture: Linear vs. Virtualized) |
size: 140TB (128TiB) Thin Provisioning allows you to create the LUNs independent of the physical storage |
|
Host Interconnect |
2 x 8Gb Fibre Channel ports per controller 2 x 1GbE RJ-45 ports per controller 2 x 10GbE ports per controller 2x 12Gb SAS ports per controller |
|
Maximum Drives w/ 3 expansion |
48 LFF/99 SFF |
|
Maximum Host Supported |
64 in v2 UI 512 in v3 UI |
|
Standard Software |
Snapshots (64) |
|
Optional Software |
Remote Snap (linear storage only) Max Snapshot (512) |