FAP-221E Specification
FAP-221E Specification |
|
|
Hardware |
|
|
Hardware Type |
Indoor AP |
|
Number of Radios |
2 + 1 BT/BLE |
|
Number of Antennas |
4 Internal + 1 Internal BT/BLE |
|
Antenna Type and Peak Gain |
PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
|
Frequency Bands (GHz)* |
2.400 ??2.4835, 5.150 ??5.250, 5.250 ??5.350, 5.470 ??5.725,5.725 ??5.850 |
|
Radio 1 Capabilities |
2.4 GHz b/g/n (2×2:2 stream) 20/40 MHz (256 QAM) |
|
Radio 2 Capabilities |
5 GHz a/n/ac (2×2:2 stream) 20/40/80 MHz (256 QAM) |
|
Maximum Data Rate |
Radio 1: up to 400 Mbps Radio 2: up to 867 Mbps |
|
Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
|
Interfaces |
1x 10/100/1000 Base-T RJ45 |
|
Power over Ethernet (PoE) |
IEEE 802.3af |
|
Simultaneous SSIDs |
16 (14 if background scanning enabled) |
|
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
|
User/Device Authentication |
WPA ?? and WPA2 ?? with 802.1x or Preshared key, WEP,Web Captive Portal, MAC blacklist & whitelist |
|
Maximum Tx Power |
2.4 GHz: 23 dBm / 200 mW (2 chains combined)* 5 GHz: 24 dBm / 251 mW (2 chains combined)* |
|
Kensington Lock |
Yes |
|
IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X,802.3af, 802.3az |
|
SSID Types Supported |
Local-Bridge, Tunnel, Mesh |
|
Per Radio Client Capacity |
Up to 512 |
|
Cellular Co-existence |
Yes |
|
LED Off Mode |
Yes |
|
Advanced 802.11 Features |
|
|
802.11ac MU-MIMO Wave 2 |
Yes |
|
Transmit Beam Forming (TxBF) |
Yes |
|
Low-Density Parity Check (LDPC) Encoding |
Yes |
|
Maximum Likelihood Demodulation (MLD) |
Yes |
|
Maximum Ratio Combining (MRC) |
Yes |
|
A-MPDU and A-MSDU Packet Aggregation |
Yes |
|
MIMO Power Save |
Yes |
|
Short Guard Interval |
Yes |
|
Wireless Monitoring Capabilities |
|
|
Rogue Scan Radio Modes |
Background, Full-time |
|
WIPS / WIDS Radio Modes |
Background, Full-time |
|
Packet Sniffer Mode |
Yes |
|
Spectrum Analyzer |
Yes |
|
Dimensions |
|
|
Length x Width x Height |
6.3 x 6.3 x 1.85 inches(160 x 160 x 47 mm) |
|
Mounting Options |
Ceiling, T-Rail, and Wall |
|
Included Accessories |
Mount kits for Ceiling, T-Rail, and Wall |
|
Environment |
|
|
Power Supply |
SP-FAP200-PA-XX, GPI-115,or GPI-130 |
|
Power Consumption (Max.) |
12.36 W |
|
Humidity |
5 ??90% non-condensing |
|
Operating / Storage Temperature |
-4 ??113 ?F (-20 ??45 ?C) /-40 ??158 ?F (-40 ??70 ?C) |
|
Directives |
Low Voltage Directive ?? RoHS |
|
UL2043 Plenum Material |
Yes |
|
Mean Time Between Failures |
>30 Years |
|
IP Rating |
|
|
Surge Protection Built In |
|
|
Hit-less PoE Failover |
No |
|
Certifications |
|
|
Wi-Fi Alliance Certified |
Yes |
|
DFS |
FCC, IC, CE, Japan, Taiwan |
|
Warranty |
|
|
Limited Lifetime Warranty |
Yes |
|
* Frequency selection and power may be restricted to abide by regional regulatory compliance laws. |
|